Operating instructions

viously selected display as soon as you shift
out of reverse gear.
i
For further information on the rear view
camera, see separate vehicle Operator's
Manual.
X
Press the W function button.
The system menu appears.
X
Select SettingsSettings by turning cVd the
COMAND controller and press W to con-
firm.
X
Select RearRear ViewView CameraCamera and press W to
confirm.
X
Select Activation by R gearActivation by R gear and press
W to confirm.
The function is switched on O or off ª,
depending on the previous status.
Night View Assist Plus
On vehicles with Night View Assist Plus you
can have the image from Night View Assist
Plus shown on the COMAND display.
X
Switch on COMAND (Y page 29).
X
Activate Night View Assist Plus, see the
separate operating instructions.
The image from Night View Assist Plus
appears in the COMAND display.
X
To adjust the brightness: select Bright‐Bright‐
nessness by turning cVd the COMAND con-
troller and press W to confirm.
X
Turn cVd the COMAND controller and
press W to confirm.
X
Switching automatic activation on/off:
select NightNight ViewView AssistAssist Auto.Auto. Acti‐Acti‐
vationvation and press W to confirm.
Switch the option on O or off ª.
Option switched on: while using other func-
tions e.g. the navigation system, Night View
Assist Plus is active in the background. In
the dark, in unlit surroundings and at
speeds in excess of 37 mph (60 km/h), the
Night View image is automatically dis-
played as soon as pedestrians or animals
are detected.
X
To switch off the display: select BackBack and
press W to confirm or press the k but-
ton.
360° camera
Important notes
The 360° camera is only an aid. It is not a
replacement for your attention to your imme-
diate surroundings. You are always responsi-
ble for safe maneuvering and parking. When
maneuvering or parking, make sure that there
are no persons, animals or objects in the area
in which you are maneuvering.
Overview
The 360° camera surveys the vehicle sur-
roundings and assists you, for example when
parking or at exits with reduced visibility.
The 360° camera images can be shown in full
screen mode or in seven different split-screen
views on the COMAND display. A split-screen
view also includes a top view of the vehicle.
This view is calculated from the data supplied
by the installed cameras (virtual camera).
Displaying the 360° camera image
The 360° camera image can be displayed if:
R
your vehicle is equipped with a 360° cam-
era
R
COMAND is switched on (Y page 29)
R
the 360° Camera360° Camera function is activated
56
360° camera
Vehicle functions