Operating instructions

You can change the sequence of the way
points and the destination.
X
To change the sequence: from the menu,
select MoveMove by turning cVd the COMAND
controller and press W to confirm.
X
Turn cVd the COMAND controller and
move the way point or destination to the
desired position, then press W to confirm.
X
To delete way points: from the menu,
select DeleteDelete and press W to confirm.
Accepting way points for the route
X
Select StartStart in the way point menu by
turning cVd the COMAND controller and
press W to confirm.
The route is calculated with the entered
way points.
i
ContinueContinue is displayed instead of StartStart
when Calculate Alternative RoutesCalculate Alternative Routes
is activated in the navigation menu
(Y page 93).
i
If a way point has been passed during
route guidance, the way point will be dis-
played in the way point menu with a green
arrow. Once the route has been recalcu-
lated, the way point is deleted from the way
point menu.
Searching for a gas station when the
fuel level is low
If the reserve fuel warning is displayed, you
will see the message: Reserve FuelReserve Fuel
Level. Do you want to start theLevel. Do you want to start the
search//for surrounding gas sta‐search//for surrounding gas sta‐
tions?tions?.
X
Select YesYes or NoNo.
If you select YesYes, the gas station search
starts. When the search is complete, a list
of the gas stations available along the route
or in the vicinity is displayed.
If you select NoNo, the search is canceled.
X
Select a gas station and press W to con-
firm.
The address of the gas station is displayed.
X
Confirm StartStart by pressing W.
The selected gas station is entered into
position 1 of the way points menu. Route
guidance begins.
If the way points menu already contains
four way points, a prompt will be displayed,
asking you whether you wish to enter the
gas station into position 1. If you select
YesYes, the gas station is transferred into the
list and way point 4 is deleted.
Entering a POI
Calling up the points of interest menu
Example: POI menu
POIs are predefined destinations within cat-
egories, e.g. a gas station in the AUTOMO‐AUTOMO‐
TIVETIVE category.
X
To switch to navigation mode: press the
Ø button.
X
To show the menu: press W the COMAND
controller.
X
Select DestinationDestination in the navigation sys-
tem menu bar by turning cVd the
COMAND controller and press W to con-
firm.
X
Select FromFrom POIsPOIs and press W to confirm.
A menu appears.
76
Entering a POI
Navigation