Operating instructions

Calling up the Routes menu
X
Insert the SD memory card (Y page 191).
X
To switch to navigation mode: press the
Ø button.
X
To show the menu: press W the COMAND
controller.
X
Select DestinationDestination in the navigation sys-
tem menu bar by turning cVd the
COMAND controller and press W to con-
firm.
X
Select RoutesRoutes.
Starting/ending recording
X
Call up the Routes menu (Y page 96).
X
To start recording : select StartStart
RecordingRecording in the Routes menu by turning
cVd the COMAND controller and press
W to confirm.
During the recording, the recorded route is
shown behind the current vehicle position
with gray strokes (symbol for tire tracks).
X
To end recording: select Stop Record‐Stop Record‐
inging in the Routes menu by turning cVd the
COMAND controller and press W to con-
firm.
Displaying and editing the recorded
route
X
Insert the SD memory card (Y page 191).
X
Call up the Routes menu (Y page 96).
X
Select ListList in the Routes menu by turning
cVd the COMAND controller and press
W to confirm.
Previously recorded routes are displayed.
X
Select a route and press W to confirm.
The map appears with a menu. The
recorded route is shown in the map with a
blue dotted line.
X
To view a demonstration of the route
on the map: select DemoDemo by turning cVd
96
Route guidance
Navigation