Operating instructions

Voice Control System settings
Opening/closing the help window
The help window also shows you information
on audible instructions:
R
during individualization
R
during subsequent operation of the Voice
Control System.
X
Press the Ø button.
The VehicleVehicle menu appears.
X
To select System SettingsSystem Settings: slide 6 the
controller, turn and press to confirm.
A menu appears.
X
To select Voice ControlVoice Control: turn and press
the controller.
X
Select Help WindowHelp Window.
You have switched the help window on
O or off ª.
More information on the Voice Control Sys-
tem is available in the separate operating
instructions.
Individualization
Using individualization, you can fine-tune the
Voice Control System to your own voice. This
will help improve voice recognition (see the
separate operating instructions).
WLAN
Overview
Conditions:
To establish a WLAN connection between
COMAND and a WLAN-enabled device, such
as a tablet computer or smartphone:
R
WLAN must be activated at COMAND and
at the device to be connected.
If COMAND is to be used as a WLAN hotspot:
R
COMAND must be connected to an Inter-
net-enabled mobile phone via Bluetooth
®
or USB.
R
The Internet access data for the mobile
phone network provider must be selected
or set for COMAND.
R
There must be an Internet connection to
COMAND.
Activating WLAN
X
To select VehicleVehicle from the main function
bar: turn and press the controller.
X
To switch to the menu bar: slide 6 the
controller.
X
Select System SettingsSystem Settings.
The System SettingsSystem Settings menu is displayed.
X
Select WiFiWiFi.
The WLAN menu appears.
X
Select ActivateActivate.
X
Press the controller.
Switch the connection on O or off ª,
depending on the previous setting.
Connecting the device
General notes
i
The exact WLAN connection procedure
may vary depending on the device to be
connected. Follow the instructions that are
shown in the display. Further information
can be found on the operating instructions
for the device you wish to connect.
WLAN
39
System settings