Operating instructions

Connecting a device via WPS PIN
Prerequisite:
For this type of connection, the device to be
connected must support "Connect using WPS
PIN".
X
To select VehicleVehicle from the main function
bar: turn and press the controller.
X
To switch to the menu bar: slide 6 the
controller.
X
Select System SettingsSystem Settings.
The System SettingsSystem Settings menu is displayed.
X
Select WiFiWiFi.
The WLAN menu appears.
X
Select Connect via WPS PINConnect via WPS PIN.
X
Select the vehicle from the device to be
connected and "Connect using WPS PIN".
The vehicle is displayed with the SSID MBMB
WLAN XXXXXWLAN XXXXX.
The device to be connected generates a
PIN.
X
This PIN is also entered on COMAND.
Connecting the device by pressing a
button (push button)
Prerequisite:
For this type of connection, the device to be
connected must support "Connect via push
button".
X
To select VehicleVehicle from the main function
bar: turn and press the controller.
X
To switch to the menu bar: slide 6 the
controller.
X
Select System SettingsSystem Settings.
The System SettingsSystem Settings menu is displayed.
X
Select WiFiWiFi.
The WLAN menu appears.
X
Select Connect via WPS PBCConnect via WPS PBC.
X
Select the vehicle from the device to be
connected and Connect via WPS PBCConnect via WPS PBC.
The vehicle is displayed with the SSID MBMB
WLAN XXXXXWLAN XXXXX.
X
Select ContinueContinue in COMAND.
Connecting the device via a security key
X
To select VehicleVehicle from the main function
bar: turn and press the controller.
X
To switch to the menu bar: slide 6 the
controller.
X
Select System SettingsSystem Settings.
The System SettingsSystem Settings menu is displayed.
X
Select WiFiWiFi.
The WLAN menu appears.
X
Select Connect Using Security KeyConnect Using Security Key.
X
Select the vehicle from the device to be
connected. The vehicle is displayed with
the SSID MB WLAN XXXXXMB WLAN XXXXX.
40
WLAN
System settings