Operating instructions

X
Enter the security key that appears on the
COMAND display for the device to be con-
nected.
X
Confirm the entry.
Generating a new security key
X
To select VehicleVehicle from the main function
bar: turn and press the controller.
X
To switch to the menu bar: slide 6 the
controller.
X
Select System SettingsSystem Settings.
The System SettingsSystem Settings menu appears.
X
Select WiFiWiFi.
The WLAN menu appears.
X
Select Generate Security KeyGenerate Security Key.
X
Select RegenerateRegenerate.
A new security key is generated.
X
To save the security key: turn the controller
and select SaveSave.
The WLAN menu appears. The new security
key will now be displayed and verified when
a connection is established via the security
key. The connection must be re-estab-
lished with the newly created security key.
i
Device connections established using the
previous security key will no longer work
after the security key is changed. You have
to reconnect these devices (Y page 39).
Changing the name of the SSID
X
To select VehicleVehicle from the main function
bar: turn and press the controller.
X
To switch to the menu bar: slide 6 the
controller.
X
Select System SettingsSystem Settings.
The System SettingsSystem Settings menu is displayed.
X
Select WiFiWiFi.
The WLAN menu appears.
X
Select Change SSIDChange SSID.
A dialog for entering the SSID appears.
X
Enter new SSID.
X
Select ¬.
X
Press the controller.
The vehicle with the new SSID will now be
shown on the device and in the ConnectConnect
Using Security KeyUsing Security Key menu when a con-
nection is established.
i
Device connections established using the
previous SSID will no longer work after the
SSID is changed. You have to reconnect
these devices (Y page 39).
Bluetooth
®
settings
General information about Blue-
tooth
®
Bluetooth
®
-capable devices, e.g. mobile
phones, have to comply with a certain profile
in order to be connected to COMAND. Every
Bluetooth
®
device has its own specific Blue-
tooth
®
name.
Bluetooth
®
settings
41
System settings