Operating instructions

The image from the rear view camera is
shown in the COMAND display when reverse
gear is engaged if:
R
your vehicle is equipped with a rear view
camera
R
COMAND is switched on
R
the Activation by R gearActivation by R gear function is
switched on.
As soon as the function is switched on, you
will see the previous view on the display:
R
select transmission position P
R
after driving forwards a short distance
You can find further information about the
rear view camera in the vehicle Operator's
Manual.
X
Switch on COMAND (Y page 26).
X
Press the Ø button in the center con-
sole.
The vehicle menu is displayed.
X
Slide 6 the controller.
X
To select System SettingsSystem Settings: turn and
press the controller.
X
Select Rear View CameraRear View Camera.
The Rear View CameraRear View Camera menu appears.
X
Select Activation by R gearActivation by R gear.
The function is switched on O or off ª,
depending on the previous status.
When you start the vehicle and engage
reverse gear, the camera cover opens auto-
matically if the function is activated. The
area behind the vehicle is shown with guide
lines in the display (see the vehicle Opera-
tor's Manual).
The rear view camera can detect moving and
stationary objects. If, for example, a pedes-
trian or another vehicle is detected, these
objects are marked with bars. The system is
only able to detect and mark stationary
objects when your vehicle is moving. By con-
trast, stationary objects will always be
detected and marked.
Switching object detection on/off
X
To select Object DetectionObject Detection in the rear
view camera menu: turn and press the con-
troller.
The function is switched on O or off ª,
depending on the previous status.
Opening the camera cover for cleaning
X
To select Open Camera CoverOpen Camera Cover in the rear
view camera menu: turn and press the con-
troller.
The PleasePlease Wait...Wait... message appears for
approximately three seconds.
The camera cover opens. The camera cover
closes automatically when you lock the
vehicle or pull away.
Climate control settings
Basic settings of the climate control
bar
Climate control bar
You can set the climate control functions
directly in the climate control bar and change
them in the climate control menu.
:
Adjusts temperature, airflow and air dis-
tribution, left, as well as displaying the
current setting
;
Calls up the climate control menu and dis-
plays the current cooling and airflow set-
ting
=
Adjusts temperature, airflow and air dis-
tribution, right, as well as displaying the
current setting
54
Climate control settings
Vehicle functions