Operating instructions

X
Select ° in the characterbar and press the
9 button to confirm.
or
X
While the ° iconis highlighted, press the
6 button on COMAND.
In both cases, the calls dialed list appears.
The most recently dialed number is at the
top.
X
To selectacall: press the 9 or :
button.
X
To make a call: press the 9 or 6
button.
Connecting acall to an entry in acall list
or in the COMAND phone book
X
Call up a call listand select an entry using
the 9: buttons.
or
X
Call up the COMAND phone book and
select an entry using the 9:
buttons.
X
To make a call: press the 9 or 6
button.
Functions available during acall
Overview
Telephone operationwith a single call
:
Personyou are calling
;
Icon for active telephone connection
=
To switch hands-free microphone on/off
?
To send DTMF tones (not possible with all
mobile phones)
A
Device name of the mobile phone
connected
B
To end a call
Switching the hands-free microphone
on/off
This function is also available during an active
phone call.
X
Call up the telephone basic menu
(Y page 99)
X
To switch off: select Mike off and press
the 9 button to confirm.
If the microphone is switched off, the
display shows the Q icon and the The
microphone is off message appears for
a short period.
X
To switch on: select Mike on and press
the 9 button to confirm.
The Q symbol disappears. You will briefly
see the The microphone is on message.
Ending an active call
X
Select ¢ and press the 9 button to
confirm.
or
X
Press the ~ button on COMAND or on
the multifunction steering wheel.
Call waiting
i
The "call waiting" function must be
supported by the network provider and be
enabled.
If you are busy with a single call and receive
another call, the telephone number of the call
waiting will be entered in the list of incoming
calls. Awarning tone sounds.
Sending DTMF tones
This function is notsupported by all mobile
phones.
Telephone operation
101
Telephone
Z