Operating instructions

X
Enter characters and save the entry.
Proceed as described under "Entering
characters" in the "Entering characters in
the address and phone books" section
(Y page 22).
Using call lists
Introduction
For telephony via the Bluetooth
®
interface,
COMAND shows a list of calls received
(including missed calls) or a list of calls dialed.
i
The respective menu itemcan only be
selected if calls have already been received
or dialed on COMAND.
Displaying missed calls in theCOMAND
display is not supported by all mobile
phones.
These lists remain in COMAND, even after
another mobile phone has been connected.
Opening the call list and selecting an
entry
X
Press the % function button.
X
Select Call Lists in the telephone basic
menu using the :=; buttons
and press the 9 button to confirm.
Amenu appears.
X
Select Calls Received
or Calls
Dialed using the 9: buttons and
press the 9 button to confirm.
The corresponding list appears.
Example display: list of calls received
:
List of incoming calls
;
Date/time and phone number of the
selected entry
=
To call up options
i
You can also call up the list of dialed calls
by pressing the 6 button when the
telephone basic menu is shown. Doing so
displays only names or phone numbers
without a date or time.
X
Select an entry using the 9:
buttons.
X
To dial a phone number: press the 6
button.
X
To close the list: press the k button.
Displaying details about alist entry
COMANDcan also show a shortened list entry
in full.
X
Select a list entry using the 9:
buttons.
X
Select Options using the ; buttonand
press the 9 button to confirm.
X
Select Details and press 9 to confirm.
The detailed display appears.
X
To return to the list: press the =
or ; repeatedly until the list is
highlighted.
106
Using call lists
Telephone