Operating instructions

Accepting acall
When the telephone is ready for use, you can
acceptacall at any time.When a call is
incoming, you see the name or telephone
number in the multifunction display.
X
Press the 6 button on the multifunction
steering wheel.
Rejecting or ending acall
X
Press the ~ button on the multifunction
steering wheel.
Calling a number from the COMAND
phone book
You may select and dial a numberfrom the
COMAND phone book at any time, provided
yourmobile phone is ready to receive calls.
i
If you have imported contacts
(Y page 113), you can select the phone
book entries of the mobile phone by using
the multifunction steering wheel.
X
Press the V or U button to select the
TEL display.
X
Press the & or * button to open the
phone book in the multifunction display.
X
Press the & or * button repeatedly
until the desired entry is highlighted.
The saved names are displayed
alphabetically.
i
If you press and hold the & or *
button for longer than one second, the
multifunction display will skip from the fifth
entry to the first entry found under the
following letter. Release the button to stop.
:
Mode
;
Caller's name
X
To make a call: press the 6 button on
the multifunction steering wheel.
i
If there are several numbers for this
name, you see a list of sub-entries.
X
Press the 6 button again.
The Connecting call... message
appears in the multifunction display along
with the number being dialed and the
name, if it is stored in the phone book.
The phone number dialed is stored in the
appropriate call list.
X
To exit without connecting acall: press
the ~ button on the multifunction
steering wheel.
Redialing
X
Press the V or U button to select the
TEL display.
X
Press the 6 button.
You see the last call dialed.
X
To scroll through the listofdialed calls:
press the & or * button repeatedly
until the desired entry is shown.
X
To make a call: press the 6 button.
114
Operating the telephone using the multifunction steering wheel
Telephone