Operating instructions

Loading empty magazine trays
X
Press the V load/eject button.
The magazine menu appears.
X
Select Fill empty slots.
You see the Please wait... message.
COMAND switches to the next empty
magazine tray. You then see the Please
insert disc <x>. message.
i
Never insert a data medium before
COMAND prompts you to do so. Never
insert more than one disc at a time into a
magazine tray.
X
Insert a disc into the disc slot with the
printed side facing upwards.
You see the Please wait... message.
Once the disc is loaded, the DVDchanger
switches to the next empty tray. You see
the Please insert disc <x> message.
X
Repeatthis step until all trays are loaded.
The DVD changer will play the last disc
loaded if it has been inserted correctly and
is of a permissible type. This applies even
if not all trays have been loaded with a disc.
X
To complete the insertion: press the
V eject/load button again or press the
k button.
Ejecting discs from the DVD changer
Notes
G
WARNING
Only eject a disc when the vehicle is
stationary. Otherwise, you may be distracted
from the traffic conditions and could cause an
accident.
If you remove one disc while playing another
disc, the DVD changer interrupts playback.
Playback continues once the disc has been
ejected.
Ejecting asingle disc
X
Press the V load/eject button.
The magazine menu appears. The magazine
tray with the current disc is highlighted.
:
Magazine tray loaded (ejection is enabled)
;
Disc type
=
Disc name (only if stored on the disc)
?
Currentdisc (ejecting possible)
X
Selectaloaded magazine tray using the
=; buttons and press the 9 button
to confirm.
or
X
Press number keys j to p.
The Ejecting disc <x>...
message
appears. Then, you see the following
message:
X
Take the disc out of the slot.
If you do not take the disc out of the slot,
COMAND will draw it in again automatically
after a shortwhile and load it again.
128
Audio CD/DVD and MP3 mode
Audio