Operating instructions

to terminate the currently active route
guidance.
X
Select Yes or No and press the 9 button
to confirm.
If you select Yes, COMAND will stop route
guidance and start route calculationfor the
new destination.
If you select No, COMAND will continue
with the active route guidance.
i
Route calculation takes a certain amount
of time. The time depends on the distance
from the destination, for example.
COMAND calculates the route using the
digital map data.
The calculated route may differ from the
ideal route, e.g. due to roadwork or
incomplete map data.
Entering and saving your home address
Entering your home address for the first
time
X
Enter the address as a destination, e.g. in
the form of a city, street and house number
(Y page 49).
X
After entering the address in the address
entry menu, select Save using the
=;9: buttons and press
the 9 button to confirm.
X
Select Save as "My Address" and press
the 9 button to confirm.
COMAND stores your home address as My
Address in the destination memory.
Changing apreviouslyentered home
address
X
Proceed as described under "Entering your
home address for the first time".
Aprompt appears asking whetherthe
current home address should be
overwritten.
X
Select Yes
and press the 9 button to
confirm.
After selecting Yes, the Saving
Procedure Successful message
appears.
Entering aZIP code
i
Entering a ZIP code will delete a
previously entered city.
X
Select ZIP in the address entry menu using
the =;9: buttons and
press the 9 button to confirm.
You will see the ZIP code list either with the
characterbar (option 1) or as a selection
list (option 2).
Option 1: ZIP code list with character bar
X
Enter a ZIP code. Instructions for entering
characters can be found in the "Entering
characters in navigation mode (entering a
city)" section(Ypage 22).
:
Digits entered by the user
;
Digits automatically added by the system
=
List entry most closely resembling the
characters entered so far
?
To switch to the list without the character
bar
A
To delete the entire entry: press and hold;
to delete the last character: press briefly
B
Available characters
C
Selected character
D
Unavailable characters
E
Character bar
52
Destination entry
Navigation