Operating instructions

Depending on the point of interest
selected, COMAND uses different
reference points in determining the linear
distance to the destination:
R
vicinity of current position: the linear
distance is the distance of the point of
interest from the current vehicle
position.
R
vicinity of destination: the lineardistance
is the distance of the point of interest
fromthe destination entered.
Long names of points of interest are
abbreviated. An information icon is shown
after the entry.
X
To call up the complete display: press
the ; button.
Selecting apoint of interest
X
Select a point of interest using the
9: buttons and press the 9 button
to confirm.
The full address of the pointofinterest
selected appears.
:
Point of interestwith address
;
To start route calculation
=
To store an address in the destination
memory
?
To display details
A
To make a call (when available)
B
To cancel selection
C
To show an address on the map
X
To start route calculation: select Start
and press the 9 button to confirm.
X
To store an address in the destination
memory: select Save and press the 9
button to confirm. You can now select
storage options (Y page 79).
X
To show the detailed view: select
Details and press the 9 button to
confirm.
X
To connect acall: select Call
and press
the 9 button to confirm (available if the
point of interest entry contains a phone
number).
X
To call up the map: select Map
and press
the 9 button to confirm.
X
You can scroll the map and select a
destination (Y page 56).
ZAGAT
®
rating service
Entries featuring the Zicon containadditional
ZAGAT information.ZAGAT rates restaurants,
for instance, in regard to the quality of the
food, furnishing, service, and provides an
average pricing level as well as a general
description.
After selecting an entry with a Z icon, youcan
call up the ZAGAT rating in the subsequent
screen.
Entering apoint of interest
63
Navigation
Z