Operating instructions

1
To show all traffic reports (including those
not affecting the route)
2
To have traffic reports read out, see read-
aloud function (Y page 73)
3
Affected roads, areas or regions (only
available when there are traffic reports for
the route)
X
To show all traffic reports: use the
9:=; buttons to select
Display All Messages and press the
9 button to confirm.
You see a list of all roads, areas and regions
for which traffic reports are available, even
if the reports do not affect your route.
X
To display a report: select a road, an area
or a region from the list.
X
To close the list: press the ; or =
button once or repeatedly.
Example: traffic report
1
Depending on your selection: Messages
On Route or All Messages
2
Report 1 of 1 for the road affected
3
Beginning of the affected route section
4
End of the affected route section
5
Text of report
6
Road, area or region affected by traffic
reports
C
Icon for report type, e.g. warning message
D
Country code
X
To scroll within the message or to the
next message: press the 9 or :
button.
X
To return to the message list: press
the ; or = button.
Read-aloud function
The read-aloud function is only available while
route guidance is active. It reads out traffic
reports affecting the current route. You can
adjust the text reader volume (Y page 27).
If the automatic read-aloud function for traffic
reports is activated, received traffic reports
are read out automatically.
X
If necessary, switch on navigation mode
and show the menu system (Y page 47).
X
Use the 9:=; buttons to
select TMC
and press the 9 button to
confirm.
X
Select Read out all messages on
route and press the 9 button to confirm.
76
Traffic reports
Navigation