Operating instructions

X
Select the destination using the
9: buttons and press the 9 button
to confirm.
The destination address is shown.
X
Select Save and press the 9 button to
confirm.
You can now select storage options
(Y page 79).
Selecting storage options
X
To save the destination without a
name: select Save Without Name and
press the 9 button to confirm.
COMAND stores the destination in the
destination memory and uses the address
as the destination name.
X
To save the destination with a name:
select Save With Name and press the 9
button to confirm.
X
Select a category, e.g. Home
, and press the
9 button to confirm.
The input menu appears with data fields
and the character bar.
Example display:saving adestination with a name
:
Selected data field with cursor
;
Character bar
X
Proceed as described under "Entering
characters" in the Entering characters in
navigation mode (entering acity)" section
(Y page 23).
X
Then select ¬ and press the 9 button
to confirm.
COMAND stores the destination under the
name entered.
Assigning adestination to an address
book entry
An address with complete address data that
is suitable for navigation can be assigned to
an already existing address book entry. You
can then later start route guidance to this
address straightfrom the address book
(Y page 112).
X
Select Assign to Address Book Entry
and press the 9 button to confirm.
X
Select a category, e.g. Home, and press the
9 button to confirm.
You will see the address book either with
the character bar or as a selection list.
X
To select an address book entry:
proceed as described in the "Searching for
an address book entry" section
(Y page 109).
COMAND stores the data if the address
book entry selected does not yet contain
navigable address data.
If the selected address book entry already
contains navigable address data, a prompt
will appear asking whetheryou wish to
overwrite the existing data.
X
Select Yes or No and press the 9 button
to confirm.
If you select Yes, COMAND stores the data.
Deleting adestination or the home
address from thedestination memory
X
To switch on navigation mode: press the
Ø function button.
X
To show the menu: press the 9 button.
Destination memory
79
Navigation
Z