Operator's Manual

128
Controls in detail
Seats
For information on seat adjustment, see
the “Getting started” section (
컄 page 38).
For more information on seats, see “Load-
ing” (
컄 page 259).
Easy-entry/exit feature (Vehicles with
memory function*)
This feature allows for easier entry into and
exit from the vehicle.
The easy-entry/exit feature can be
activated or deactivated in the
Convenience submenu of the control sys-
tem (
컄 page 173).
When exiting the vehicle, with the
easy-entry/exit feature activated and
depending on your selection, the steering
wheel tilts upwards and/or the driver’s
seat moves a few inches to the rear when
you:
앫 remove the SmartKey from the starter
switch,
or
앫 open the driver’s door with the
SmartKey in starter switch position 0
or 1 or the KEYLESS-GO* start/stop
button (
컄 page 36) in position 1.
Warning! G
You must make sure no one can become
trapped or injured by the moving steering
wheel and driver’s seat when the
easy-entry/exit feature is activated.
To stop seat/steering wheel movement, do
one of the following:
앫 Press seat adjustment switch
(
컄 page 39).
앫 Move steering column stalk*
(
컄 page 42).
앫 Press one of the memory position but-
tons or the memory button
M*
(
컄 page 136).
Do not leave children unattended in the ve-
hicle, or with access to an unlocked vehicle.
Children could open the driver’s door and
unintentionally activate the easy-entry/exit
feature, which could result in an accident
and/or serious personal injury.
!
Do not activate the easy-entry/exit fea-
ture if the seat backrest is in an exces-
sively reclined position. Doing so could
cause damage the front or rear seats.
First move seat backrest to an upright
position.