Operator's Manual
253
Controls in detail
Driving systems
Setting the raised level
Only select the raised level if appropriate
for the driving situation encountered.
Otherwise:
앫 fuel consumption may increase
앫 handling characteristics of the vehicle
may be unfavorable
왘 Start the engine (컄 page 34).
If the indicator lamp 2 is off:
왘 Press switch 1.
Indicator lamp 2 flashes. The vehicle
adjusts to the raised level.
The following message appears in the mul-
tifunction display while the level is being
set:
When the raised level is reached, the
following message appears in the multi-
function display for five seconds:
Indicator lamp 2 (
컄 page 252) comes on
continuously.
You can select the raised level at speeds
up to 40 mph (64 km/h). At higher speeds,
the message
Level selection not
permitted
appears in the multifunction
display.
Setting the highway/high-speed level
왘 Start the engine (컄 page 34).
If the indicator lamp 2 (
컄 page 252) is
on:
왘 Press switch 1 (컄 page 252).
Indicator lamp 2 flashes. The vehicle
adjusts to the highway/high-speed
level.
The following message appears in the
multifunction display while the level is
being set:
i
The message can be cleared by press-
ing the èÿk or
button j on the multifunction
steering wheel.
i
The message can be cleared by press-
ing the èÿk or
button j on the multifunction
steering wheel.
컄컄