Operator's Manual

329
Operation
Engine compartment
Other display messages
If the SmartKey or KEYLESS-GO*
start/stop button is not in position 2, the
following message will appear:
Turn on ignition
to see engine oil level
왘 Switch on the ignition (컄 page 34).
If you see the message:
Observe waiting time
왘 If the engine is at operating
temperature, wait five minutes before
repeating check procedure.
왘 If the engine is not at operating temper-
ature, wait 30 minutes before repeat-
ing check procedure.
If you see the message:
Engine oil level
Not when engine on
왘 Turn off the engine.
왘 If the engine is at operating tempera-
ture, wait five minutes before checking
oil.
왘 If the engine is not at operating temper-
ature yet, you must wait 30 minutes
before checking oil.
If there is excess engine oil with the engine
at operating temperature, the following
message will appear:
Engine oil level
Reduce oil level
왘 Have excess oil siphoned or drained
off. Contact an authorized
Mercedes-Benz Light Truck Center.
For more information on messages in the
multifunction display concerning engine
oil, see “Practical hints” (
컄 page 381).
!
Excess oil must be siphoned or drained
off. It could cause damage to the
engine and catalytic converter not
covered by the Mercedes-Benz Limited
Warranty.