Operation Manual

X
Pull seat backrest release strap : in
direction of arrow.
X
Completely fold seat backrest ; forward
so that it rests on seat cushion = (armrest
position).
Armrest position
X
Pull seat release strap ? in direction of
arrow.
The seat is released and flips up and
forward.
X
Push down on seat A until it engages.
Folded position
Folding outboard second-row seats
!
When the outboard second-row seats are
folded forward, the front seats may not be
moved to the rearmost position. Otherwise
you could damage the front and the
outboard second-row seats.
!
Close the cup holder in front of the
second-row seats before folding the
second-row seats. Otherwise you could
damage the cup holder and the second-row
seats.
X
Move the seat to be folded to its rearmost
position (Y page 87).
X
Remove the rear center console, if so
equipped (Y page 200).
i
The rear center console can remain
installed, if installed in the most forward
position (Y page 200). However, the cargo
compartment floor will then not be an even
plane.
X
Remove the head restraint from the
respective second-row seat (Y page 88).
X
Place the head restraint on seat
cushion ;.
X
Relieve the load on seat backrest : and
pull release lever = past the resistance
Loading and storing
191
Controls in detail
251_AKB; 4; 52, en-US
d2ureepe, Version: 2.11.8.1
2009-03-23T09:22:52+01:00 - Seite 191
Z