Operation Manual

point in direction of arrow as far as it will
go.
Seat and seat backrest : are unlocked.
X
Fold seat backrest : forward until it fully
rests on seat cushion ; in a horizontal
position.
X
Push down on folded seat backrest : until
seat cushion ; engages in seat base.
Folding third-row seats
X
Lower the head restraints of the third-row
seats completely.
i
The third-row head restraints are
adjusted in the same manner as the head
restraints of the second-row seats
(Y page 88).
X
Place seat belt in seat belt holder :.
X
Pull release handle ; on seat backrest
= in direction of arrow.
Seat backrest = is released.
X
Slowly move seat backrest = forward.
Seat cushion C is released and folds
forward automatically.
i
Strap D serves to pull up the seat
backrest when bringing the third-row seats
back to their original position
(Y page 192).
X
Fold seat cushion C to a horizontal
position.
Guide pin A must engage in recess ? of
seat backrest B.
i
The second-row seats must be in their
rearmost position (Y page 87).
X
Fold seat backrest = to a horizontal
position.
Returning seats to their original position
G
Warning!
Make sure
R
the seats are properly locked
R
the seat backrests are in an upright position
and are properly locked
An outboard second-row seat is properly
locked only when lock status indicator : is
in hinged position and red marking ; is
barely visible, see “Lock status indicators
(outboard second-row seats)”.
If a seat and seat backrest are not properly
locked, the seat could move forward and the
seat backrest could fold. You could slide
under the seat belt during braking, vehicle
192
Loading and storing
Controls in detail
251_AKB; 4; 52, en-US
d2ureepe, Version: 2.11.8.1
2009-03-23T09:22:52+01:00 - Seite 192