Operation Manual

X
When the seat is unlocked, push seat
backrest back until the seat engages
audibly.
Outboard second-row seat locked
When the seat is locked, lock status
indicator : is in hinged position and red
marking ; is barely visible.
Second-row middle seat
Folded position
X
Pull seat release strap : of seat ; in
direction of arrow.
The seat is released and flips up and
backwards.
X
Push down on seat ; until it engages in
armrest position.
X
Pull seat backrest release strap :
(Y page 90) of seat backrest in direction of
arrow.
X
Fold seat backrest to the rear until it
engages audibly.
Cargo compartment cover blind
The cargo compartment cover blind can be
installed behind the third-row seats or the
second-row seats.
!
With the cargo compartment cover blind
installed, do not pile luggage higher than
the lower edges of the rear side windows.
The cargo compartment cover blind must be
extended for installation behind the second-
row seats (Y page 195).
The cargo compartment cover blind has two
blind extensions which are connected to the
cargo compartment cover blind by cords.
Blind installed behind third-row seats
X
Rolling out: Pull cargo compartment cover
blind on handle : across the cargo
compartment.
X
Guide cargo compartment cover blind into
mounts ; and release.
X
Rolling up: Disengage cargo compartment
cover blind and guide retraction by its
handle :.
194
Loading and storing
Controls in detail
251_AKB; 4; 52, en-US
d2ureepe, Version: 2.11.8.1
2009-03-23T09:22:52+01:00 - Seite 194