Operation Manual

SmartKey with KEYLESS-GO
X
Insert mechanical key : into opening.
X
Press mechanical key : in direction of
arrow.
Battery compartment ; is unlatched.
X
Pull battery compartment ; out of the
SmartKey housing.
X
Pull out batteries =.
X
Insert new batteries = under contact
springs ? with the positive terminal (+)
side facing up.
X
Return battery compartment ; into
SmartKey housing until it locks into place.
X
Slide mechanical key : back into the
SmartKey.
X
Check the operation of the SmartKey as
well as the KEYLESS-GO function.
Replacing bulbs
Safety notes
Safe vehicle operation depends on proper
exterior lighting and signaling to a large
degree.
Correct headlamp adjustment is extremely
important. Have headlamps checked and
readjusted at regular intervals and when a
bulb has been replaced. Contact an
authorized Mercedes-Benz Center for
headlamp adjustment.
G
Warning!
Bulbs and bulb sockets can be very hot. Allow
the lamp to cool down before changing a bulb.
Keep bulbs out of reach of children.
Halogen lamps contain pressurized gas. A
bulb can explode if you
R
touch or move it when hot
R
drop the bulb
R
scratch the bulb
Wear eye and hand protection.
Because of high voltage in Xenon lamps, it is
dangerous to replace the bulb or repair the
lamp and its components. We recommend
that you have such work done by a qualified
technician.
i
Since replacing bulbs is a technically
highly demanding process, we recommend
to have them replaced at an authorized
Mercedes-Benz Center.
i
If the headlamps or front fog lamps are
fogged up on the inside as a result of high
humidity, driving the vehicle a distance with
the lights on should clear up the fogging.
312
Replacing bulbs
Practical hints
251_AKB; 4; 52, en-US
d2ureepe, Version: 2.11.8.1
2009-03-23T09:22:52+01:00 - Seite 312