Operation Manual

Example illustration: Passenger side headlamp
:
Housing cover for low-beam and high-
beam halogen or Bi-Xenon headlamp
G
Warning!
Do not remove the cover for the Bi-Xenon
headlamp. Because of high voltage in Xenon
lamps, it is dangerous to replace the bulb or
repair the lamp and its components. It is
recommended to have such work done by a
qualified technician.
;
Bulb socket for front turn signal lamp bulb
;
Bulb socket for front turn signal lamp bulb
=
Bulb socket for low-beam headlamp bulb
(halogen headlamps only)
?
Bulb socket for high-beam headlamp/
high-beam flasher bulb
Low-beam bulb (halogen headlamps
only)
X
Turn housing cover : counterclockwise
and remove it.
X
Turn bulb socket = with the bulb
counterclockwise and remove it.
X
Pull the bulb out of bulb socket =.
X
Gently press the new bulb into bulb socket
=.
X
Place bulb socket = back into the housing
and turn it clockwise until it engages.
X
Align housing cover : and turn it
clockwise until it engages.
High-beam and high-beam flasher bulb
(halogen headlamps only)
X
Turn housing cover : counterclockwise
and remove it.
X
Turn bulb socket ? with the bulb
counterclockwise and remove it.
X
Pull the bulb out of bulb socket ?.
X
Gently press the new bulb into bulb
socket ?.
Replacing bulbs
315
Practical hints
251_AKB; 4; 52, en-US
d2ureepe, Version: 2.11.8.1
2009-03-23T09:22:52+01:00 - Seite 315
Z