Operation Manual

Automatic anti-glare mirrors
G
WARNING
Electrolyte may escape if the glass in an auto-
matic anti-glare mirror breaks. The electrolyte
is harmful and causes irritation. It must not
come into contact with your skin, eyes, res-
piratory organs or clothing or be swallowed.
There is a risk of injury.
If you come into contact with the electrolyte,
observe the following:
R
Rinse off the electrolyte from your skin
immediately with water.
R
Immediately rinse the electrolyte out of
your eyes thoroughly with clean water.
R
If the electrolyte is swallowed, immediately
rinse your mouth out thoroughly. Do not
induce vomiting.
R
If electrolyte comes into contact with your
skin or hair or is swallowed, seek medical
attention immediately.
R
Immediately change out of clothing which
has come into contact with electrolyte.
R
If an allergic reaction occurs, seek medical
attention immediately.
The rear-view mirror and the exterior mirror on
the driver's side automatically go into anti-glare
mode if the following conditions are met simul-
taneously:
R
the ignition is switched on
R
incident light from headlamps strikes the sen-
sor in the rear-view mirror
The mirrors do not go into anti-glare mode if
reverse gear is engaged or if the
inte
rior lighting
is switched on.
Parking position for the exterior mir-
ror on the front-passenger side
Storing the parking position
You can position the front-passenger side exte-
rior mirror in such a way that you can see the
rear wheel on that side as soon as you engage
reverse gear. You can store this position.
Using reverse gear
:
Memory button M
;
Button for the driver's side exterior mirror
=
Button for the front-passenger side exterior
mirror
?
Adjustment button
X
Select key position 2 with the Start/Stop but-
ton.
X
Press button =.
X
Start the engine.
X
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the default setting parking posi-
tion.
X
Use button ? to adjust the exterior mirror to
a position that allows you to see the rear
wheel and the curb.
The parking position is stored.
i
If you shift the transmission to another posi-
tion, the exterior mirror on the front-
passenger side returns to the driving position
after approximately ten seconds.
Using the memory button
You can store the parking position of the exte-
rior mirror on the front-passenger side using
memory button M :. The reverse gear must not
be engaged.
X
Select key position 2 with the Start/Stop but-
ton.
X
Press button =.
X
Use button ? to adjust the exterior mirror to
a position that allows you to see the rear
wheel and the curb.
Mirrors
83
Seats, steering wheel and mirrors
Z