Operation Manual

X
Switch off the lights.
X
Open the hood.
X
Turn bulb holder : counter-clockwise and
pull out.
X
Take the bulb out of bulb holder :.
X
Insert the new bulb into bulb holder :.
X
Insert bulb holder : and turn it clockwise
until it engages.
Cornering light function (Xenon bulbs)
X
Switch off the lights.
X
Open the hood.
X
Turn housing cover : counter-clockwise
and remove it.
X
Turn bulb holder ; counter-clockwise and
pull out.
X
Take the bulb out of bulb holder ;.
X
Insert the new bulb into bulb holder ;.
X
Insert bulb holder ; and turn it clockwise.
X
Press on housing cover : and turn it to the
right.
Changing the rear bulbs
Tail lamps
Backup lamp and rear fog lamp
Due to their location, have the bulbs in the
backup lamp and the fog lamp in the tailgate
replaced at a qualified specialist workshop.
X
Switch off the lights.
X
Open the tailgate.
X
In recess ? on the inside of the closing
handle, pry off and remove the upper sec-
tion of handle = with a flat and smooth
object, e.g. a screwdriver.
X
Pull the lower section of handle : using a
sharp, sudden movement to remove it from
the paneling and then place it to one side.
X
Reach under the right-hand side of paneling
B and apply a gentle jolting force along the
entire length of the paneling in order to
unclip it.
X
Pull out connector C of the surround light-
ing by releasing the latches.
X
Place paneling B to one side.
Replacing bulbs
109
Lights and windshield wipers
Z