Operation Manual

b
Directs air through the defroster, cen-
ter and side air vents
a
Directs air through the defroster and
footwell vents
_
Directs air through the defroster, cen-
ter, side and footwell vents
i
Regardless of the air distribution setting,
airflow is always directed through the side
air vents. The side air vents can only be
closed if the adjusters are turned clockwise
until they engage.
Setting the air distribution
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 131).
X
Press the É or Ë button repeatedly
until the desired symbol appears in the dis-
play.
Setting the airflow
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 131).
X
To increase/reduce: press the K or
I button.
Switching the ZONE function on/off
X
To activate: press the á button.
The indicator lamp in the á button lights
up.
The temperature setting for the driver's
side is not adopted for the front-passenger
side.
X
To deactivate: press the á button.
The indicator lamp in the á button goes
out.
The temperature setting for the driver's
side is adopted for the front-passenger
side.
Defrosting the windshield
General notes
You can use this function to defrost the wind-
shield or to defrost the inside of the wind-
shield and the side windows.
i
You should only select the "Windshield
defrosting" function until the windshield is
clear again.
Activating/deactivating the defrosting
function for the windshield
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 131).
X
To activate: press the ¬ button.
The indicator lamp in the ¬ button lights
up.
The climate control system switches to the
following functions:
R
high airflow
R
high temperature
R
air distribution to the windshield and
front side windows
R
air-recirculation mode off
Vehicles with windshield heating: the
windshield heating is switched on using the
"Windshield defrosting" function.
i
The "Windshield defrosting" function
automatically sets the blower output to the
optimum defrosting effect. As a result, the
airflow may increase or decrease automat-
ically after the ¬ button is pressed.
i
You can adjust the blower output man-
ually while the "Windshield defrosting"
function is in operation:
Press the ó or ô button.
X
To deactivate: press the ¬ button.
The indicator lamp in the ¬ button goes
out. The previously selected settings are
restored. Air-recirculation mode remains
deactivated.
or
Operating the climate control systems
121
Climate control