Operation Manual

X
Press the à button.
The indicator lamp in the ¬ button goes
out. Airflow and air distribution are set to
automatic mode.
or
X
Turn temperature control : or E counter-
clockwise or clockwise (Y page 117).
MAX COOL maximum cooling
The MAX COOL function is only available in
vehicles for the USA.
The MAX COOL function only works when the
vehicle is ready to drive.
X
To activate: press the Ù button.
The indicator lamp in the button lights up.
X
To deactivate: press the Ù button.
The indicator lamp goes out. The previously
selected settings are restored.
When you activate MAX COOL, climate con-
trol switches to the following functions:
R
maximum cooling
R
maximum airflow
R
air-recirculation mode on
Defrosting the windows
Windows fogged up on the inside
X
Activate the ¿ "Cooling with air dehu-
midification" function.
X
Activate automatic mode Ã.
X
If the windows continue to fog up, activate
the ¬ "Windshield defrosting" function.
i
You should only select this setting until
the windshield is clear again.
Windows fogged up on the outside
X
Activate the windshield wipers.
X
Set the air distribution to P or O.
i
You should only select this setting until
the windshield is clear again.
Rear window defroster
General notes
The rear window defroster has a high current
draw. You should therefore switch it off as
soon as the rear window is clear. Otherwise,
the rear window defroster switches off auto-
matically after several minutes.
If the battery voltage is too low, the rear win-
dow defroster may switch off.
Switching on/off
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 131).
X
Press the ¤ button.
The indicator lamp in the ¤ button lights
up or goes out.
122
Operating the climate control systems
Climate control