Operation Manual

Activating/deactivating Blind Spot
Assist
X
Press the = or ; button on the steer-
ing wheel to select the DriveAssistDriveAssist menu.
X
Press the 9 or : button to select
Blind Spot AssistBlind Spot Assist.
X
Press the a button.
The current selection is displayed.
X
To activate/deactivate: press the a
button again.
For further information about Blind Spot
Assist, see (Y page 177).
Service menu
Depending on the equipment installed in the
vehicle, you have the following options in the
Serv.Serv. menu:
R
Calling up display messages in message
memory (Y page 200)
R
Checking the tire pressure electronically
(Y page 307)
R
Calling up the service due date
(Y page 271)
Settings menu
Introduction
Depending on the equipment installed in the
vehicle, In the Sett.Sett. menu you have the fol-
lowing options:
R
Changing the E-CELL settings
R
Changing the instrument cluster settings
R
Changing the light settings
R
Changing the vehicle settings
R
Restoring the factory settings
ECELL menu
Departure time
In the E-CELLE-CELL menu you can choose to cool
down or heat the vehicle interior for a prede-
fined departure time.
If you have engaged Pand the charging cable
is connected, the on-board computer dis-
plays:
R
the expected charge time of the high-volt-
age battery or
R
the RANGE PLUS condition of charge for
the departure time set.
Changing the departure time
X
Press the = or ; button on the steer-
ing wheel to select the Sett.Sett. menu.
X
Press 9 or : on the steering wheel
to select the E‑CELLE‑CELL menu.
X
Press 9 or : to select Depart.Depart.
TimeTime.
X
Press a to confirm.
You will see the selected setting.
X
Press the : or 9 button to select AA, BB
or Change CChange C.
X
Press = or ; to select Depart.Depart.
Time HoursTime Hours.
X
Press the 9 or : button to set the
hour.
X
Press = or ; to select Depart.Depart.
Time MinutesTime Minutes.
X
Press 9 or : to set the minutes.
X
Press a to confirm.
After changing from one menu to another,
the departure time setting is stored.
Menus and submenus
195
On-board computer and displays
Z