Operation Manual

Activating/deactivating pre-entry climate
control (via SmartKey)
X
Press the = or ; button on the steer-
ing wheel to select the Sett.Sett. menu.
X
Use 9 or : to select the E-CELLE-CELL
submenu.
X
Press a to confirm.
X
Press 9 or : to select Pre-EntryPre-Entry
Climate Cont. (Via Key):Climate Cont. (Via Key):.
X
Press a to activate or deactivate.
If pre-entry climate control (via SmartKey)
is activated, pre-entry climate control (via
SmartKey) is switched on temporarily when
you unlock the vehicle.
Setting the maximum charge current
Before charging the high-voltage battery,
check the maximum permissible charge cur-
rent for the relevant power socket.
You can set a maximum charge current in the
E-CELLE-CELL menu.
It is only necessary to select the maximum
charge current if there are no charge current
settings on the charging cable.
i
The maximum charge current values in
the on-board computer may deviate from
the charging cable values.
Example: changing the charge current
:
Sets the maximum charge current
i
This menu is not available in some coun-
tries. In this case, the maximum charge
current for the power socket is limited to a
fixed level, depending on the country con-
cerned.
X
Press the = or ; button on the steer-
ing wheel to select the Sett.Sett. menu.
X
Use 9 or : to select the E-CELLE-CELL
submenu.
X
Press the 9 or : button to select
Max. Charge CurrentMax. Charge Current.
X
Press a to confirm.
X
Press 9 or : in the submenu to
select desired maximum charge cur-
rent :.
X
Press the a button on the multifunction
steering wheel to confirm.
The high-voltage battery is charged with
the selected maximum charge current.
Instrument cluster
Unit of measurement for distance
The Display Unit Speed-/Odometer:Display Unit Speed-/Odometer:
function allows you to choose whether cer-
tain displays appear in kilometers or miles in
the multifunction display.
X
Press the = or ; button on the steer-
ing wheel to select the Sett.Sett. menu.
X
Press the : or 9 button to select the
Instrument ClusterInstrument Cluster submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Display Unit Speed-/OdometerDisplay Unit Speed-/Odometer func-
tion.
You will see the selected setting: kmkm or
milesmiles.
X
Press the a button to save the setting.
The selected unit of measurement for dis-
tance applies to:
R
digital speedometer in the TripTrip menu
R
odometer and the trip odometer
R
trip computer
R
current energy consumption and approxi-
mate range
R
navigation instructions in the NaviNavi menu
R
cruise control
R
ASSYST PLUS service interval display
Menus and submenus
197
On-board computer and displays
Z