Operation Manual

Display messages
Introduction
General notes
Display messages appear in the multifunction display.
Display messages with graphic displays may be shown in simplified form in the Operator's
Manual and may therefore differ from the multifunction display.
Please respond in accordance with the display messages and follow the additional notes in this
Operator's Manual.
Certain display messages are accompanied by an audible warning tone or a continuous tone.
When the ignition is switched off, all display messages are deleted, apart from some high-
priority display messages. Once the causes of the high-priority display messages have been
rectified, the corresponding display messages are also deleted.
When you stop and park the vehicle, please observe the notes on:
R
HOLD function (Y page 163)
R
Parking (Y page 153)
Hiding display messages
X
Press the a or % button on the steering wheel to hide the display message.
The display message is cleared.
The multifunction display shows high-priority display messages in red. Some high-priority dis-
play messages cannot be hidden.
The multifunction display shows these messages continuously until the causes for the mes-
sages have been remedied.
Message memory
The on-board computer saves certain display messages in the message memory. You can call
up the display messages:
X
Press the = or ; button on the steering wheel to select the Serv.Serv. menu.
If there are display messages, the multifunction display shows 2 Messages2 Messages, for example.
X
Press the 9 or : button to select the entry, e.g. 2 Messages2 Messages.
X
Press a to confirm.
X
Press the 9 or : button to scroll through the display messages.
200
Display messages
On-board computer and displays