Operation Manual

Safety systems
Display messages
Possible causes/consequences and MM Solutions
!÷
Currently Unavail‐Currently Unavail‐
able See Opera‐able See Opera‐
tor's Manualtor's Manual
ABS (Anti-lock Braking System), BAS (Brake Assist), ESP
®
(Elec-
tronic Stability Program), the HOLD function, RBS (Recuperative
Brake System) and hill start assist are temporarily unavailable.
COLLISION PREVENTION ASSIST PLUS may also have failed.
The !, ÷, å and é (USA only)/ J(Canada only),
warning lamps in the instrument cluster may also light up.
ATTENTION ASSIST is deactivated.
Possible causes are:
R
self-diagnosis is not yet complete.
R
the on-board voltage may be insufficient.
G
WARNING
The braking performance of the electric motor using recuperative
braking may be either reduced or not effective. If you do not make
an additional effort to apply the brake yourself, the braking effect
may not be sufficient. If necessary, counteract the reduced regen-
erative braking effect by applying the brake yourself.
The brake system continues to function normally, but without the
functions listed above. The wheels could therefore lock if you
brake hard, for example.
The steerability and braking characteristics may be severely affec-
ted. The braking distance in an emergency braking situation can
increase.
If ESP
®
is not operational, ESP
®
is unable to stabilize the vehicle.
There is an increased risk of skidding and an accident.
X
Carefully drive a short distance on a suitable stretch of road,
making slight steering movements at a speed above 12 mph
(20 km/h).
If the display message disappears, the functions mentioned
above are available again.
If the display message continues to be displayed:
X
Drive on carefully.
X
Visit a qualified specialist workshop.
!÷
Inoperative SeeInoperative See
Operator's ManualOperator's Manual
ABS, BAS, ESP
®
, the HOLD function, RBS and hill start assist are
not available due to a malfunction.
COLLISION PREVENTION ASSIST PLUS may also have failed.
The !, ÷, å, é (USA only)/J (Canada only) and
$(USA only)/J(Canada only) warning lamps in the instru-
ment cluster may also light up.
Display messages
201
On-board computer and displays
Z