Operation Manual

Storing settings
With the memory function, you can store up
to three different settings, e.g. for three dif-
ferent people.
The following settings are stored as a single
memory preset:
R
seat and backrest position
R
driver's side: position of the exterior mir-
rors on the driver's and front-passenger
sides
X
Adjust the seat (Y page 90).
X
Adjust the exterior mirror on the driver's
side (Y page 94).
X
Briefly press the M memory button and
then press storage position button 1, 2 or 3
within three seconds.
The settings are stored in the selected pre-
set position. A tone sounds when the set-
tings have been completed.
Calling up a stored setting
X
Press and hold the relevant preset position
button 1, 2 or 3 until the seat and exterior
mirrors are in the stored position.
i
The setting procedure is interrupted as
soon as you release the storage position
button.
Memory function
97
Seats, steering wheel and mirrors
Z