Operation Manual

X
Switch off the lights.
X
Open the tailgate.
X
In recess ? on the inside of the closing
handle, pry off and unclip ; the upper sec-
tion of handle = with a flat and smooth
object, e.g. a screwdriver and remove.
X
Pull the lower section of handle : using a
sharp, sudden movement to remove it from
the paneling and then place it to one side.
X
Reach under the right-hand side of trim B
and lightly tug along the entire length of the
trim in order to unclip A it.
X
Pull out connector C of the surround light-
ing by releasing the latches.
X
Place paneling B to one side.
X
On the side where the bulb is to be
replaced, unclip the remaining part of trim
D from the assembly using a sudden,
sharp movement, until the bulb holder is
accessible.
X
Remove bulb holder E using both sides of
lever F.
Bulb holder
X
Backup lamp G: remove the bulb from
bulb holder E.
X
Insert the new bulb into the bulb holder.
108
Replacing bulbs
Lights and windshield wipers