Operation Manual

the W switch in the door to stop the move-
ment of the side windows. To continue closing
the side window, pull on the W switch.
X
Convenience closing feature: press and
hold the e button until the side win-
dows are closed.
The indicator lamp in the e button lights
up. Air-recirculation mode is activated.
If parts of the body are in the closing area
during convenience closing, proceed as fol-
lows:
X
Press the W button for opening/closing
the side windows.
The side window stops.
X
To then open the side windows, press the
W button again.
or
X
Press the e button for longer than two
seconds.
The side windows move in the opposite
direction.
X
Convenience opening feature: press and
hold the e button until the side win-
dows are opened. The side windows move
back to their original positions.
The indicator lamp in the e button goes
out. Air-recirculation mode is deactivated.
Notes on the automatic reversing feature for
the side windows (
Y page 83).
If you open the side windows manually after
closing them with the convenience closing
feature, they will remain in this position when
opened using the convenience opening fea-
ture.
Pre-entry climate control via Smart-
Key
Before getting in, the vehicle interior can be
briefly warmed or ventilated in advance. In
addition, the air from the air vent can be pre-
cooled.
The high-voltage battery must be sufficiently
charged before the "Pre-entry climate control
via key" function can be activated.
Activating/deactivating the pre-entry cli-
mate control (via key)
When the vehicle is unlocked using the Smart-
Key or KEYLESS-GO, the climate control func-
tions are activated.
The pre-cooling and pre-heating climate con-
trol functions last 5 minutes.
When the vehicle is pre-cooled, the following
functions are activated as necessary:
R
Climate control system
R
Cooling with air dehumidification
R
Blower
When the vehicle is pre-heated, the following
functions are activated as necessary:
R
Climate control system
R
Blower
R
Seat heating
R
Windshield heating
R
Rear window defroster
Pre-entry climate control is automatically
switched off when operational readiness
mode is requested.
Activating/deactivating pre-entry cli-
mate control (via key)
You can activate and deactivate the pre-entry
climate control (via key) function using the
on-board computer in the E-CELL
submenu
(
Y page 196).
i
If the condition of charge of the high-volt-
age battery is below the specified minimum
condition of charge, pre-entry climate con-
trol will not be activated even if it has been
set.
124
Operating the climate control systems
Climate control