Operation Manual

SmartKey functions
:
& Locks the vehicle
;
F Opens/closes the trunk lid
=
% Unlocks the vehicle
X
To unlock centrally: press button =.
If you do not open the vehicle within
approximately 40 seconds of unlocking:
R
the vehicle is locked again.
R
protection against theft is reactivated.
X
To lock centrally: press button :.
The SmartKey centrally locks/unlocks:
R
the doors
R
the trunk lid
R
the fuel filler flap
The turn signals flash once when unlocking
and three times when locking.
You can also set an audible signal to confirm
that the vehicle has been locked. The audible
signal can be activated and deactivated via
COMAND or Audio 20 (see the separate oper-
ating instructions).
When the locator lighting is activated via
COMAND or Audio 20, it lights up when it is
dark after the vehicle is unlocked with the
remote control (see the separate operating
instructions).
X
To open the trunk lid automatically
from outside the vehicle: press and hold
button ; until the trunk lid opens.
X
To open the trunk lid automatically
from outside the vehicle: if the SmartKey
is in close proximity to the vehicle: press
the F button on the SmartKey.
You can release the button as soon as the
trunk lid starts to close.
KEYLESS-GO
General notes
Bear in mind that the engine can be started by
any of the vehicle occupants if there is a
SmartKey in the vehicle.
Locking/unlocking centrally
You can start, lock or unlock the vehicle using
KEYLESS-GO. To do this, you only need carry
the SmartKey with you. You can combine the
functions of KEYLESS-GO with those of a con-
ventional SmartKey. Unlock the vehicle by
using KEYLESS-GO, for instance, and lock it
using the & button on the SmartKey.
The driver's door and the door at which the
handle is used, must both be closed. The
SmartKey must be outside the vehicle. When
locking or unlocking with KEYLESS-GO, the
distance between the SmartKey and the cor-
responding door handle must not be greater
than 3 ft (1 m).
A check which periodically establishes a radio
connection between the vehicle and the
SmartKey determines whether a valid Smart-
Key is in the vehicle. This occurs, for example:
R
when starting the engine
R
whilst driving
R
when the external door handles are
touched
R
during convenience closing
SmartKey
81
Opening and closing
Z