Operation Manual

X
To deactivate: press the á button.
The indicator lamp in the á button goes
out.
The temperature setting for the driver's
side is adopted for the front-passenger
side.
Defrosting the windshield
General notes
You can use this function to defrost the wind-
shield or to defrost the inside of the wind-
shield and the side windows.
i
You should only select the "Windshield
defrosting" function until the windshield is
clear again.
Activating/deactivating the defrosting
function for the windshield
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 141).
X
To activate: press the ¬ button.
The indicator lamp in the ¬ button lights
up.
The climate control system switches to the
following functions:
R
high airflow
R
high temperature
R
air distribution to the windshield and
front side windows
R
air-recirculation mode off
i
The "Windshield defrosting" function
automatically sets the blower output to the
optimum defrosting effect. As a result, the
airflow may increase or decrease automat-
ically after the ¬ button is pressed.
i
You can adjust the blower output man-
ually while the "Windshield defrosting"
function is in operation:
R
Air-conditioning system: turn airflow
control A counter-clockwise or clock-
wise (Y page 125).
R
Dual-zone automatic climate control:
press the ó or ô button.
X
To deactivate: press the ¬ button.
The indicator lamp in the ¬ button goes
out. The previously selected settings are
restored. Air-recirculation mode remains
deactivated.
or
X
Dual-zone climate control: press the Ã
button.
The indicator lamp in the ¬ button goes
out. Airflow and air distribution are set to
automatic mode.
or
X
Air-conditioning system: turn temperature
control : counter-clockwise or clockwise
(Y page 125).
Dual-zone automatic climate control: turn
temperature control : or E counter-
clockwise or clockwise (Y page 127).
MAX COOL maximum cooling
The MAX COOL function is only available in
vehicles for the USA.
MAX COOL is only operational when the
engine is running.
X
To activate: press the Ù button.
The indicator lamp in the button lights up.
X
To deactivate: press the Ù button.
The indicator lamp goes out. The previously
selected settings are restored.
When you activate MAX COOL, climate con-
trol switches to the following functions:
R
maximum cooling
R
maximum airflow
R
air-recirculation mode on
Operating the climate control systems
133
Climate control