Operation Manual

X
Lift up the cover of socket :.
mbrace
General notes
The mbrace system is only available in the
USA.
You must have a license agreement to acti-
vate the mbrace service. Make sure that your
system is activated and operational. To log in,
press the ï MB Info call button. If any of
the steps mentioned are not carried out, the
system may not be activated.
If you have questions about the activation,
contact one of the following telephone hot-
lines:
Mercedes-Benz Customer Assistance Center
at 1-800-FOR-MERCedes (1-800-367-6372)
or 1-866-990-9007
Shortly after successfully registering with the
mbrace service, a user ID and password will
be sent to you by mail. You can use this pass-
word to log onto the mbrace area under "Own-
ers Online" at http://www.mbusa.com.
The system is available if:
R
it has been activated and is operational
R
the corresponding mobile phone network is
available for transmitting data to the Cus-
tomer Center
R
a service subscription is available
R
the starter battery is sufficiently charged
Determining the location of the vehicle on a
map is only possible if:
R
GPS reception is available.
R
the vehicle position can be forwarded to
the Customer Assistance Center.
The mbrace system
To adjust the volume during a call, proceed as
follows:
X
Press the W or X button on the mul-
tifunction steering wheel.
or
X
Use the COMAND/Audio 20 volume con-
trol.
The system offers various services, e.g.:
R
Automatic and manual emergency call
R
Roadside Assistance call
R
MB Info call
You can find information and a description of
all available features under "Owners Online"
at http://www.mbusa.com.
System self-test
After you have switched on the ignition, the
system carries out a self-diagnosis.
A malfunction in the system has been detec-
ted if one of the following occurs:
R
The indicator lamp in the SOS button does
not come on during the system self-test.
R
The indicator lamp in the F Roadside
Assistance button does not light up during
self-diagnosis of the system.
R
The indicator lamp in the ï MB Info call
button does not light up during self-diag-
nosis of the system.
R
The indicator lamp in one or more of the
following buttons continues to light up red
after the system self-diagnosis:
-
SOS button
-
F Roadside Assistance call button
-
ï MB Info call button
R
The InoperativeInoperative or the Service NotService Not
ActivatedActivated message appears in the multi-
function display after the system self-diag-
nosis.
If a malfunction is indicated as outlined
above, the system may not operate as expec-
ted. In the event of an emergency, help will
have to be summoned by other means.
272
Features
Stowage and features