Operation Manual

Stolen vehicle recovery service
If your vehicle has been stolen:
X
Notify the police.
The police will issue a numbered incident
report.
X
This number will be forwarded to the
Mercedes-Benz Customer Assistance Cen-
ter together with your PIN.
The Mercedes-Benz Customer Assistance
Center then tries to locate the system. The
Mercedes-Benz Customer Assistance Cen-
ter contacts you and the local law enforce-
ment agency if the vehicle is located.
However, only the law enforcement agency
is informed of the location of the vehicle.
If the anti-theft alarm system is activated for
longer than 30 seconds, the Mercedes-Benz
Customer Assistance Center is automatically
notified.
Vehicle Health Check
With the Vehicle Health Check, the Customer
Assistance Center can provide improved sup-
port for problems with your vehicle. During an
existing call, vehicle data is transferred to the
Customer Assistance Center.
The customer service representative can use
the received data to decide what kind of
assistance is required. You are then, for
example, guided to the nearest authorized
Mercedes-Benz Center or a recovery vehicle
is called.
If vehicle data needs to be transferred during
an MB Info call or a Roadside Assistance call,
this is initiated by the Customer Assistance
Center.
The Roadside Assistance ConnectedRoadside Assistance Connected
message appears in the display. If the Vehicle
Health Check can be started, the RequestRequest
for Vehicle Diagnostics Receivedfor Vehicle Diagnostics Received
Start vehicle diagnostics?Start vehicle diagnostics? message
appears in the display.
X
Press the YesYes button to confirm the mes-
sage.
X
When the Vehicle DiagnosticsVehicle Diagnostics
Please Start IgnitionPlease Start Ignition message
appears: turn the SmartKey to position 2 in
the ignition lock (Y page 141).
X
If the Please follow the instruc‐Please follow the instruc‐
tions received by phone and movetions received by phone and move
your vehicle to a safe position.your vehicle to a safe position.
message appears: please follow the
instructions received by phone and move
your vehicle to a safe position.
The message in the display disappears.
The vehicle operating state check begins.
During this procedure, you will see the
VehicleVehicle DiagnosticsDiagnostics ActiveActive message.
If you select CancelCancel, the Vehicle Health
Check is canceled completely.
When the check is complete, the SendingSending
vehicle diagnostics data. (Voicevehicle diagnostics data. (Voice
connection may be interrupted dur‐connection may be interrupted dur‐
inging datadata transfer)transfer) message appears. The
vehicle data can now be sent.
X
Press the OKOK button to confirm the mes-
sage.
The voice connection with the Customer
Assistance Center is terminated.
The Vehicle Diagnostics: Transfer‐Vehicle Diagnostics: Transfer‐
ring Data...ring Data... message appears.
The vehicle data is sent to the Customer
Assistance Center.
Depending on what the customer service rep-
resentative agreed with you, the voice con-
nection is re-established after the transfer is
complete. If necessary, you will be contacted
at a later time by another means, e.g. by e-
mail or phone.
Another function of the Vehicle Health Check
is the transfer of service data to the Customer
Assistance Center. If a service is due, the dis-
play shows a message to this effect together
with information about any special offers at
your workshop.
This information can also be called up under
"Owners Online" at http://www.mbusa.com.
278
Features
Stowage and features