Operation Manual

The rear-view mirror and the exterior mirror on
the driver's side automatically go into anti-glare
mode if the following conditions are met simul-
taneously:
R
the ignition is switched on and
R
incident light from headlamps strikes the sen-
sor in the rear-view mirror
The mirrors do not go into anti-glare mode if
reverse gear is engaged or if the interior lighting
is switched on.
Parking position for the exterior mir-
ror on the front-passenger side
Setting and storing the parking position
You can position the front-passenger side exte-
rior mirror in such a way that you can see the
rear wheel on that side as soon as you engage
reverse gear. You can store this position.
Using reverse gear
:
Button for the driver's side exterior mirror
;
Button for the front-passenger side exterior
mirror
=
Adjustment button
?
Memory button M
X
Stop the vehicle and turn the SmartKey to
position 2 in the ignition lock (
Y page 127).
X
Press button ; for the exterior mirror on the
front-passenger side.
X
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the preset parking position.
X
Use adjustment button = to adjust the exte-
rior mirror to a position that allows you to see
the rear wheel and the curb.
The parking position is stored.
i
If you shift the transmission to another posi-
tion, the exterior mirror on the front-
passenger side returns to the driving position.
Using the memory button
You can store the parking position of the exte-
rior mirror on the front-passenger side using
memory button M ?. The reverse gear must not
be engaged.
X
Turn the SmartKey to position 2 in the ignition
lock (
Y page 127).
X
With the exterior mirror on the front-
passenger side activated, use adjustment
button = to adjust the exterior mirror. In the
exterior mirror, the rear wheel and the curb
should be visible.
X
Press memory button M ? and one of the
arrows on adjustment button = within three
seconds.
The parking position is stored if the exterior
mirror does not move.
X
If the mirror moves out of position, repeat
these steps.
Calling up a stored parking position set-
ting
X
Turn the SmartKey to position 2 in the ignition
lock (
Y page 127).
X
Adjust the exterior mirror on the front-
passenger side using button ;.
X
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger side
moves back to its original position:
R
as soon as you exceed a speed of 9 mph
(15 km/h)
R
if you press button : for the exterior mirror
on the driver's side
Memory function
Storing settings
G
WARNING
If you use the memory function on the driver's
side while driving, you could lose control of
Memory function
105
Seats, steering wheel and mirrors
Z