Operation Manual

the vehicle as a result of the adjustments
being made. There is a risk of an accident.
Only use the memory function on the driver's
side when the vehicle is stationary.
G
WARNING
Children could become trapped if they acti-
vate the memory function, particularly when
unattended. There is a risk of injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
G
WARNING
When the memory function adjusts the seat or
steering wheel, you and other vehicle occu-
pants – particularly children – could become
trapped. There is a risk of injury.
While the memory function is making adjust-
ments, make sure that no one has any body
parts in the sweep of the seat or steering
wheel. If somebody becomes trapped, imme-
diately release the memory function position
button. The adjustment process is stopped.
The memory function can be used at any time,
e.g. even when the SmartKey isn't in the ignition
lock.
With the memory function, you can store up to
three different settings, e.g. for three different
people.
The following settings are stored as a single
memory preset:
R
position of the seat, backrest and head
restraint
R
active multicontour seat: seat contour,
dynamic function level
R
driver's side: position of the exterior mirrors
on the driver's and front-passenger sides
X
Adjust the seat (Y page 95).
X
On the driver's side, adjust the steering wheel
(
Y page 100) and the exterior mirrors
(
Y page 103).
X
Press memory button M and one of the stor-
age position buttons 1, 2 or 3 within three
seconds.
The settings are stored in the selected preset
position. A tone sounds when the settings
have been completed.
Calling up a stored setting
X
Press and hold the relevant storage position
button 1, 2 or 3, until the seat, steering wheel
and exterior mirrors are in the stored position.
i
The setting procedure is interrupted as soon
as you release the storage position button.
106
Memory function
Seats, steering wheel and mirrors