Operation Manual

Setting the airflow
X
Turn the SmartKey to position 2 in the ignition
lock (
Y page 127).
X
To increase: press the K button.
X
To reduce: press the I button.
i
You can use 3-zone automatic climate con-
trol to set the airflow in the rear compartment
separately.
If the battery is not sufficiently charged, blower
output may be reduced. As soon as the battery
is sufficiently charged, full blower output will be
available.
Switching the ZONE function on/off
X
To activate: press the á button.
The indicator lamp in the á button lights
up.
Dual-zone automatic climate control: the tem-
perature setting for the driver's side is not
adopted for the front-passenger side.
3-zone automatic climate control: the tem-
perature setting for the driver's side is not
adopted for the front-passenger side and the
rear compartment.
X
To deactivate: press the á button.
The indicator lamp in the á button goes
out.
Dual-zone automatic climate control: the tem-
perature setting for the driver's side is adop-
ted for the front-passenger side.
3-zone automatic climate control: the tem-
perature setting for the driver's side is adop-
ted for the front-passenger side and the rear
compartment.
Defrosting the windshield
You can use this function to defrost the wind-
shield or to clear a fogged up windshield or side
windows on the inside.
Switch off the "Windshield defrosting" function
as soon as the windshield is clear again.
X
Turn the SmartKey to position 2 in the ignition
lock (
Y page 127).
X
To activate: press the ¬ button.
The indicator lamp in the ¬ button lights
up.
The climate control system switches to the
following functions:
R
high airflow
R
high temperature
R
air distribution to the windshield and front
side windows
R
air-recirculation mode off
If the battery is not sufficiently charged, blower
output may be reduced. Once the battery is suf-
ficiently charged again, full blower output will be
available again.
X
To deactivate: press the ¬ button.
The indicator lamp in the ¬ button goes
out. The previously selected settings are
restored. Air-recirculation mode remains
deactivated.
MAX COOL maximum cooling
The MAX COOL function is only available in vehi-
cles for the USA.
MAX COOL is only operational when the engine
is running.
X
To activate: press the Ù button.
The indicator lamp in the Ù button lights
up.
X
To deactivate: press the Ù button.
The indicator lamp in the Ù button goes
out. The previously selected settings are
restored.
When you activate MAX COOL, climate control
switches to the following functions:
R
maximum cooling
R
maximum airflow
R
air-recirculation mode on
Defrosting the windows
Windows fogged up on the inside
X
Activate the ¿ cooling with air dehumidi-
fication function.
X
Activate automatic mode Ã.
X
Adjust the side air vents so that the warmed
air is directed to the side windows.
X
If the windows continue to fog up, activate the
"windshield defrosting" function ¬.
122
Operating the climate control systems
Climate control