Operation Manual

DIRECT SELECT lever
Overview of transmission positions
j
Park position with parking lock
k
Reverse gear
i
Neutral
h
Drive
The DIRECT SELECT lever is on the right of the
steering column.
The DIRECT SELECT lever always returns to its
original position. The current transmission posi-
tion P, R, N or D appears in the transmission
position display in the multifunction display
(
Y page 135).
Transmission position and drive pro-
gram display
The current transmission position and drive pro-
gram appear in the multifunction display.
:
Transmission position display
;
Drive program display
The arrows in the transmission position display
show how and into which transmission positions
you can shift using the DIRECT SELECT lever.
If the transmission position display in the mul-
tifunction display is not working, you should pull
away carefully to check whether the desired
transmission position is engaged. Ideally, you
should select transmission position D and drive
program E or S.
Engaging park position P
!
If the engine speed is too high or the vehicle
is moving, do not shift the automatic trans-
mission directly from D to R, from R to D or
directly to P. The automatic transmission
could otherwise be damaged.
X
Push the DIRECT SELECT lever in the direction
of arrow P.
Transmission position display P is shown in
the multifunction display.
Depressing the brake and pushing the DIRECT
SELECT lever up or down disengages the park-
ing lock. The transmission is in N neutral.
In order to shift from park position P directly into
R or D:
R
depress the brake pedal and
R
push the DIRECT SELECT lever up or down
past the first point of resistance
Engaging park position P automatically
Park position P is automatically engaged if:
R
you switch off the engine using the Smartkey
and remove the SmartKey
R
you switch off the engine using the Smartkey
or using the Start/Stop button and open the
driver's door or front-passenger door
R
the driver's door is opened when the vehicle is
stationary or driving at very low speed and the
transmission is in position D or R
Under certain conditions, the automatic trans-
mission shifts automatically to transmission
position P if the HOLD function or DISTRONIC
PLUS is activated. Observe the information on
the HOLD function (
Y page 165) and on
DISTRONIC PLUS (
Y page 159).
Engaging reverse gear R
!
Only shift the automatic transmission to R
when the vehicle is stationary.
X
If the transmission is in position D or N: push
the DIRECT SELECT lever up past the first
point of resistance.
X
If the transmission is in position P: depress
the brake pedal and push the DIRECT SELECT
lever up past the first point of resistance.
The ECO start/stop function is not available
when reverse gear is engaged. Further informa-
Automatic transmission
135
Driving and parking
Z