Operation Manual

Trip computer "From Start" or "From
Reset"
:
Distance
;
Driving time
=
Average speed
?
Average fuel consumption
X
Press the = or ; button on the steering
wheel to select the Trip
menu.
X
Press the 9 or : button to select
From Start
or From Reset.
The values in the From
Start submenu are cal-
culated from the start of a journey whilst the
values in the From Reset
submenu are calcu-
lated from the last time the submenu was reset
(
Y page 199).
In the following cases, the trip computer is auto-
matically reset From Start
:
R
the ignition has been switched off for more
than four hours.
R
999 hours have been exceeded.
R
9,999 miles have been exceeded.
When 9,999 hours or 99,999 miles have been
exceeded, the trip computer is automatically
reset From Reset
.
ECO display
The ECO display is not available in Mercedes-
AMG vehicles.
X
Press the = or ; button on the steering
wheel to select the Trip
menu.
X
Press the 9 or : button to select ECO
DISPLAY.
If the ignition remains switched off for longer
than four hours, the ECO display will be auto-
matically reset.
For more information on the ECO display, see
(
Y page 149).
Displaying the range and current fuel
consumption
Mercedes-AMG vehicles: the menu only dis-
plays the approximate range.
X
Press the = or ; button on the steering
wheel to select the Trip
menu.
X
Press 9 or : to select the display with
approximate range and the current fuel con-
sumption.
The approximate range that can be covered
depends on the fuel level and your current
driving style. If there is only a small amount of
fuel left in the fuel tank, a vehicle being refu-
eled C appears instead of approximate
range.
Digital speedometer
X
Press the = or ; button on the steering
wheel to select the Trip
menu.
X
Press the 9 or : button to select the
digital speedometer.
A gearshift recommendation Z can also
appear in the display.
Mercedes-AMG vehicles: a gearshift recom-
mendation is displayed in the status area of
the multifunction display.
Observe the information on gearshift recom-
mendation Z when shifting manually
(
Y page 140).
Resetting values
X
Press the = or ; button on the steering
wheel to select the Trip
menu.
X
Press the 9 or : button to select the
function that you wish to reset.
X
Press a to confirm your selection.
X
Press : to select Yes and press a to
confirm.
Menus and submenus
199
On-board computer and displays
Z