Operation Manual

Audio data from various audio devices or media
can be played, depending on the equipment
installed in the vehicle.
X
Switch on the multimedia system and select
audio CD or MP3 mode (see the separate
operating instructions).
X
Press the = or ; button on the steering
wheel to select the Audio
menu.
X
To select the next/previous track: briefly
press the 9 or : button.
X
To select a track from the track list (rapid
scrolling): press and hold the 9 or :
button until desired track : appears.
If you press and hold 9 or :, the rapid
scrolling speed is increased. Not all audio
drives or data carriers support this function.
If track information is stored on the audio
device or medium, the multifunction display
will show the number and title of the track.
Video DVD operation
Only for vehicles with COMAND: you can use the
Audio
menu to operate video DVDs.
X
Switch on the multimedia system and select
video DVD (see the separate operating
instructions).
X
Press the = or ; button on the steering
wheel to select the Audio
menu.
X
To select the next or previous scene:
briefly press the 9 or : button.
X
To select a scene from the scene list
(rapid scrolling): press and hold the 9
or : button until desired scene :
appears.
Telephone menu
Introduction
G
WARNING
If you operate information systems and com-
munication equipment integrated in the vehi-
cle while driving, you will be distracted from
traffic conditions. You could also lose control
of the vehicle. There is a risk of an accident.
Only operate the equipment when the traffic
situation permits. If you are not sure that this
is possible, park the vehicle paying attention
to traffic conditions and operate the equip-
ment when the vehicle is stationary.
When telephoning, you must observe the legal
requirements for the country in which you are
currently driving.
X
Switch on the mobile phone (see the manu-
facturer’s operating instructions).
X
Switch on the multimedia system (see sepa-
rate operating instructions).
X
Establish a Bluetooth
®
connection to the mul-
timedia system (see the separate operating
instructions).
X
Press the = or ; button on the steering
wheel to select the Tel
menu.
You will see one of the following display mes-
sages in the multifunction display:
R
Phone READY or the name of the network
provider: the mobile phone has found a net-
work and is ready to receive.
R
Phone No Service: there is no network
available or the mobile phone is searching for
a network.
Accepting a call
If someone calls you when you are in the Tel
menu, a display message appears in the multi-
function display.
You can accept a call at any time regardless of
the menu selected.
X
Press the 6 button on the steering wheel
to accept an incoming call.
202
Menus and submenus
On-board computer and displays