Operation Manual

Further information about DISTRONIC PLUS
with Steering Assist and Stop&Go Pilot
(
Y page 162).
Activating/deactivating ATTENTION
ASSIST
X
Press the = or ; button on the steering
wheel to select the DriveAssist
menu.
X
Press the 9 or : button to select
Attention Assist
.
X
Press a to confirm your selection.
The current selection appears.
X
Press a to confirm.
X
Press the : or 9 button to set Off,
Standard
or Sensitive.
X
Press the a button to save the setting.
When ATTENTION ASSIST is deactivated, the
é symbol appears in the multifunction dis-
play in the assistance graphics display.
For further information about ATTENTION
ASSIST, see (
Y page 184).
Activating/deactivating Blind Spot
Assist
X
Press the = or ; button on the steering
wheel to select the DriveAssist
menu.
X
Press the 9 or : button to select
Blind Spot Assist
.
X
Press the a button.
The current selection appears.
X
To activate/deactivate: press the a but-
ton again.
For further information about Blind Spot Assist,
see (
Y page 187).
For further information about Active Blind Spot
Assist, see (
Y page 190).
Activating/deactivating Lane Keeping
Assist
X
Press the = or ; button on the steering
wheel to select the DriveAssist
menu.
X
Press the 9 or : button to select
Lane Keep. Assist
.
X
Press the a button.
The current selection appears.
X
Press a to confirm.
X
Press the : or 9 button to set Off,
Standard
or Adaptive.
X
Press the a button to save the setting.
For further information about Lane Keeping
Assist, see (
Y page 189).
For further information about Active Lane Keep-
ing Assist, see (
Y page 193).
Service menu
Depending on the equipment installed in the
vehicle, you have the following options in the
Serv.
menu:
R
Calling up display messages in message
memory (
Y page 212)
R
Restarting the tire pressure loss warning sys-
tem (
Y page 308)
R
Checking the tire pressure electronically
(
Y page 308)
R
Calling up the service due date
(
Y page 278)
Settings menu
Introduction
Depending on the equipment installed in the
vehicle, you have the following options in the
Sett.
menu:
R
Changing the instrument cluster settings
(
Y page 205)
R
Changing the light settings (Y page 206)
R
Changing the vehicle settings (Y page 207)
R
Changing the convenience settings
(
Y page 208)
R
Restoring the factory settings (Y page 209)
Instrument cluster
Selecting the distance unit
The Display Unit Speed-/Odometer: func-
tion allows you to choose whether certain dis-
plays appear in kilometers or miles in the mul-
tifunction display.
X
Press the = or ; button on the steering
wheel to select the Sett.
menu.
X
Press the : or 9 button to select the
Instrument Cluster
submenu.
X
Press a to confirm.
Menus and submenus
205
On-board computer and displays
Z