Operation Manual

Lights
Display messages
Possible causes/consequences and M Solutions
b
Check Left Low Beam
(example)
The corresponding bulb is faulty.
X
Visit a qualified specialist workshop.
i
LED light sources: the display message for the corresponding
lamp only appears when all the LEDs in the lamp have failed.
b
Active Headlamps
Inoperative
The active light function is faulty.
X
Visit a qualified specialist workshop.
b
Malfunction See
Operator's Manual
The exterior lighting is defective.
X
Visit a qualified specialist workshop.
b
Auto Lamp Function
Inoperative
The light sensor is defective.
X
Visit a qualified specialist workshop.
b
Switch Off Lights
You leave the vehicle and the lights are switched on. A warning tone
also sounds.
X
Turn the light switch to position Ã.
Adaptive Highbeam
Assist Currently
Unavailable See
Operator's Manual
Adaptive Highbeam Assist is deactivated and temporarily inoperative.
Possible causes are:
R
the windshield in the camera's field of vision is dirty.
R
visibility is impaired due to heavy rain, snow or fog.
X
Clean the windshield.
If the system detects that the camera is fully operational again, the
Adaptive
Highbeam Assist Now Available message is displayed.
Adaptive Highbeam Assist is operational again.
Adaptive Highbeam
Assist Inoperative
Adaptive Highbeam Assist is faulty.
X
Visit a qualified specialist workshop.
Display messages
221
On-board computer and displays
Z