Operation Manual

X
Pull connector ? and the hose out of the
housing.
X
Remove the cap from the valve on the col-
lapsible spare wheel.
X
Screw union nut : of the hose onto the valve.
X
Make sure on/off switch A of the tire infla-
tion compressor is set to 0.
X
Insert connector ? into a 12 V socket
(
Y page 262) in your vehicle.
X
Turn the SmartKey to position 1 in the ignition
lock (
Y page 127).
X
Press on/off switch A on the tire inflation
compressor to I.
The tire inflation compressor is switched on.
The tire is inflated. The tire pressure is shown
on pressure gauge =.
X
Inflate the tire to the specified tire pressure.
The specified tire pressure is printed on the
yellow label of the emergency spare wheel.
X
When the specified tire pressure has been
reached, press on/off switch A on the elec-
tric air pump to 0.
The tire inflation compressor is switched off.
X
Turn the SmartKey to position 0 in the ignition
lock.
X
If the tire pressure is higher than the specified
pressure, press pressure release valve but-
ton ; until the correct tire pressure has been
reached.
X
Unscrew air hose union nut : from the valve.
X
Screw the cap onto the valve of the collapsi-
ble spare wheel again.
X
Stow connector ? and the hose in the lower
section of the tire inflation compressor.
X
Stow the tire inflation compressor in the vehi-
cle.
328
Emergency spare wheel
Wheels and tires