Operation Manual

340
Practical hints
Replacing bulbs
Front turn signal lamp
1 Securing screw
2 Turn signal lens
왘 Loosen and remove securing
screws 1.
왘 Remove turn signal lens 2.
3 Bulb
왘 Press bulb 3 gently into the socket,
turn counterclockwise and remove it.
왘 Press new bulb 3 gently into the sock-
et and turn clockwise until it engages.
왘 Reinstall turn signal lens 2.
왘 Install and tighten securing screws 1.
Side marker lamp
The following description applies to both,
the front and the rear side marker lamps.
Front side marker shown
1 Securing screw
2 Side marker lamp housing
왘 Loosen and remove securing
screws 1.
왘 Remove side marker lamp housing 2.
i
G55AMG:
Remove the protective grille before
replacing bulbs.
i
Do not overtighten securing screws 1.
Otherwise turn signal lens 2 could be
damaged.