Operation Manual
76
Safety and Security
Occupant safety
Installation of infant and child restraint
system
1 Anchorage ring for rear left side seat
2 Anchorage ring for rear center seat
3 Anchorage ring for rear right side seat
왘 Remove the cargo compartment cover
blind (
컄 page 183).
왘 Remove the partition net*
(
컄 page 185).
왘 Guide top tether strap between head
restraint and top of seat back. Head
restraint must be installed and posi-
tioned such that the top tether strap
can pass freely between the head re-
straint and top of seat back.
4 Hook
왘 Securely fasten hook 4 to anchorage
ring.
Once the top tether anchorage hook is at-
tached, the child restraint itself can be se-
cured. Secure child restraint and tighten
the top tether strap according to the child
restraint manufacturer’s instructions.
i
For safety, make sure the hook is at-
tached to the ring beyond the safety
catch, as illustrated.
Warning! G
Use only the described anchorage rings for
the respective child seat. Other lashing eye-
lets could tear in the case of an accident.
Make sure
앫 the fastening straps are not crossed or
twisted.
앫 the hook is properly attached and is
closed.