Operation Manual

Adjusting the rear seat head restraint
height
X
Once the head restraint is fully lowered,
press release catch :.
X
To raise: pull the head restraint up to the
desired position.
X
To lower: press release catch : and push
the head restraint down until it is in the
desired position.
Installing/removing the rear seat head
restraints
X
To remove: pull the head restraint up to
the stop.
X
Press release catch : and pull the head
restraint out of the guides.
X
To re-install: place the head restraint in
the guides of the backrest.
i
The notches on the guide rod must be on
the left-hand side when viewed in the direc-
tion of travel.
X
Push the head restraint down until you hear
it engage in position.
Adjusting the multicontour seat
:
To adjust the thigh cushion
;
To adjust the backrest contour in the lum-
bar region
=
To adjust the backrest contour in the
upper back region
?
To adjust the side bolsters of the seat
backrest
You can adjust the contour of the front seats
individually so as to provide optimum support
for your back and sides.
X
Make sure that the SmartKey is in position
1 or 2 (Y page 133) in the ignition lock.
Adjusting the 4-way lumbar support
You can adjust the contour of the front seat
backrests individually to provide optimum
support for your back.
:
To raise the backrest contour
;
To soften the backrest contour
=
To lower the backrest contour
?
To harden the backrest contour
88
Seats
Seats, steering wheel and mirrors